skip to Main Content

5 Of The Best Work Boots For Construction

Last updated on October 21st, 2019 at 04:53 pm

Are you looking to buy the best work boots for construction? We have plenty of them. Here are some of the best ones:

Factors to consider when buying the best construction work boots

When you are buying these boots, you need to consider plenty of factors. The most integral are:

Insole and outsole material: Both of them should be made from high-quality rubber. This is to make it easy for you to wash them once you are done with the construction project.

The rubber materials also ensure that the work boots have enough friction and provide enough stability once you are done.

Heel: The heel of the work boot should be high. This is to prevent dirt and slurry from getting into the work boot.

This ensures that the work boot is comfortable and dry throughout the project.

Weight: How heavy is the work boot? Since you will be wearing the work boot for a long time, go for one that is as light as possible.

In addition to this, the work boot should be made from high-quality materials.

Here are some of the best construction work boots that you should consider going for:

Calolina men’s 8 inch insulated WP composite toe logger

From the initial look of the boot, you can tell that it’s going to take the stress that comes with the construction site.

The shoe is made from high-quality leather and it’s long thus no materials can get in. The work shoe is also waterproof, heat, oil, slip, and abrasion-resistant.

It has a steel shank support that makes it more durable. While the work shoe has a tough exterior, it has softer insides which make it comfortable to wear.


  •  Tough exterior
  • Water, heat, abrasion and chemical resistant
  • Can last up to 5 years if you take good care of it

Cons of the work shoe

  • Some customers have complained that it’s hard to break in. The cool thing is that once you break it in, it neatly molds into the shape of your feet.


Treds over-the shoe 17” slush boots

These are the best boots to wear when working on the construction site when you are working with concrete.

The boots are long and made from rubber. This ensures that the concrete doesn’t get into your feet.

Since they are made from rubber, you can be sure that they will be easy to clean.

While the shoes are ideal for use in the concrete areas, you should avoid using them in a harsh environment as they will get damaged fast.

Pros of the work boots

  •  Made from rubber thus easy to clean after the project
  • They are long preventing the concrete from getting into your feet


  • Not ideal for heavy usage
  • Can easy tear

The original muckboots muckmaster Hi cut boot

This is an all-weather heavy work boot that unlike the previous one, you can use it even in the worst conditions. The work boot will protect you whether you are working in mud, rubble, wet concrete, bad weather and even dirt.

In addition to the shoe being tough, it’s 100% waterproof; thus it doesn’t allow any water in keeping you dry and comfortable.

To increase your comfort levels, the work boot has a contoured footbed and a super-soft inner lining. The work boot also has extra rubber underlays that insulate the boot from sub-freezing temperatures.

Pros of the shoe

  • Easy to clean due to the rubber construction
  • Tough construction
  • Ideal for different construction areas


  • Doesn’t last for a long time like the leather units


Timberland pro men’s ascender 6” alloy safety toe industrial and construction shoe

The work boots have a tough construction thus you can be sure that they will last for a long time.

They aren’t as tall as the previous ones but when you lace them correctly, no concrete can get in.

To ensure your comfort when working, the work boots have a fully cushioned footbed. They also have comfortable material around the ankle area that increases your comfort.


  • Durable
  • Very comfortable
  • Shock resistant
  • Beautiful design


  • Some customers have complained that they are difficult to break-in

Redwing heritage roughneck boot

The most striking feature of the work boots is the oil-tanned leather that is not only stylish but also waterproof and sweat absorbent. The boots have a Goodyear welt construction that ensures that the units last for a long time.

To provide you with maximum comfort, the shoes have a full-grain leather upper, footboard and cork midsole. The leather molds comfortably to your feet.


  • Stylish
  • Durable
  • Comfortable
  • Waterproof


  • Some people have complained that they take time to break-in

Tips for buying the best work boots for construction

Arch help

Without the correct arch help, you will be uncomfortable wearing the work boots. In fact, you can’t stand the entire day with uncomfortable boots.

To be comfortable and productive in your construction project, invest in work boots with the correct arch help.

The right arch to go for depends on the nature of your feet. When you are in the shoe store, try out a number of shoes and settle on the most comfortable.


The width of the work boot is of great importance as it determines how comfortable you are. The width of the safety boot you go for depends on the width of your foot.

If you have slim feet, go for slim boots, but if your feet are wide, go for the wide boots. The cool thing is that there are many of these boots in the market.

You only need to find the right ones.

As a rule of thumb, avoid boots that are too slim you won’t be comfortable wearing them the entire day.

When you wear slim boots and yet your feet are wide, your toes will be squeezed thus be uncomfortable.

On the other hand, if you wear wide steel toe work boots and yet you have slim feet, the work boot will be too snug thus give you blisters.

To ensure that you are buying the work boot of the right width take your time to try on the shoe. Wear the shoe and walk in it in the store a number of times before completing the purchase.

The weight of the work boot

How heavy is the work boot? This is crucial. As a construction worker, you want a work boot that is light enough so that you can easily walk.

Safety work boots that are too heavy will put a lot of pressure on your knees, calves, and ankles keeping you too uncomfortable to the extent that you are unable to complete your tasks.

If the weight is too much for you, you risk suffering from tendonitis and issues with the Achilles.


This is how well the work boot is constructed. Properly constructed work boots are not only comfortable to wear, but they also last for a long time.

If you have bought work boots before, you know that they don’t come cheap; therefore, when you are buying the safety boot, you need to ensure that it’s properly made.

As a rule of thumb, ensure that it’s made from leather. It also should have a properly made inner sole that increases your comfort levels.

Mistakes to avoid when buying the best work boots for construction


Studies show that many people make plenty of errors when buying the best work boots for construction. The most common mistakes include:

Buying the brand: There is nothing wrong with purchasing a safety work boot from a reputable brand, but it’s silly to buy the boot solely because it’s made by a popular brand.

Remember that just because a well-known company makes a boot, it doesn’t mean that it’s of high quality or the best for you.

There are many less popular brands, and they make excellent quality work boots. Before you complete a purchase, take your time to research.

Buying cheap: We all love bargains. To get the most from the work boot, you should avoid a cheap one as, like everything else, you get what you pay for.

If you buy a cheap steel toe work boot, the boot will not only be uncomfortable to wear, and it also might come apart after only a short while.

This will force you to head back to the stores to buy a new one, which will be too costly on your part.

Buying the wrong boots: If you didn’t know, it’s wise that you know that work boots serve different roles. There are construction work boots, landscaping work boots, ironworker boots, slip-on shoes, and many others.

You might buy good quality work boots, but they might not be the right ones for your construction needs.

Remember that as a construction worker, you will be spending most of your time standing; therefore, you want work boots that are comfortable to wear.

It’s also common for the construction sites to be waterlogged. To keep the water out of your feet, buy safety boots that are waterproof. The safety boots should also be strong enough to resist the damage of concrete.

Tips on how to make your construction work boots more comfortable

The biggest problem with construction work boots is discomfort. This is because the workers spend most of their time standing.

To ensure that the shoes you are buying are comfortable all the time, ensure that they are comfortable by the time you are buying them.

As a rule of thumb, they should have a comfortable design. The comfortable work boots also should have an insole that provides you with enough support.

When you wear shoes, walk in them in the store to determine how comfortable they are.

If you are comfortable wearing them, go ahead and make the purchase. It’s common for the comfort levels to reduce with time as the material is degraded.

The cool thing is that you can easily increase comfort by buying new insoles. You can also increase the comfort levels by wearing thicker socks.

Most fo the work boots are narrow at the time of purchase which can make them feel uncomfortable to wear. The cool thing is that you can widen the shoes using alcohol and other tricks.

Tips on how to take care of the construction work boots

Regardless of how properly constructed the work boots are, there is no way they will last for a long time if you don’t take good care of them.

The cool thing is that it’s easy to keep them in top shape. Some of the things you need to do include:

Regular cleaning: After the construction project, you should clean the work boots immediately.

This not only keeps the work boots clean and beautiful, it also gets rid of concrete and other materials that would destroy the units.

Repair them regularly: Due to the tough nature of the construction site, it’s common for the work boots to get damaged.

For example, it’s not rare to find them being damaged by a piece of metal.

When this happens you shouldn’t allow the boots to retain their damage for long. To prevent the damage from escalating, repair it as soon as possible.

Waterproof: The construction site is known for its wet nature. While the boots are usually waterproofed, the feature tends to fade away with time.

To retain it, regularly apply the waterproofing material.

Change the boots: Exposing the same boot to tough environment day in day out greatly reduces their lifespan.

For the boots to last for a long time, have two or more pairs that you can alternate.


This is what you need to know when buying the best work boots for construction. The key to buying the right boots is taking your time when making the purchase.

You also should buy the work boots from a reputable store.

Back To Top